manualshive.com logo in svg

ELTEX ESR-10, User Manual, Page: 405 / 440

Share
Download
ELTEX ESR-10 User Manual Download Page 405

ESR service routers. ESR-Series. Functionality description. Version 1.12.0

405

•

•

•

•

Step

Description

Command

Keys

31

Define HTTP Proxy server port on the 
router

(optional).

esr(config-subscriber-
control)# ip proxy 
http redirect-port 
<PORT>

<PORT> – port number, set in the 

range of [1..65535].

32

Define destination TCP ports from 
which the traffic will be redirected to 
the router HTTPS Proxy server

(optional).

esr(config-subscriber-
control)# ip proxy 
https listen-ports 
<NAME>

<NAME> – TCP/UDP ports profile 

name, set by the string of up to 31 
characters.

33

Define HTTPS Proxy server port on 
the router

(optional).

esr(config-subscriber-
control)# ip proxy 
https redirect-port 
<PORT>

<PORT> – port number, set in the 

range of [1..65535].

34

Set router IP address that will be 
used as source IP address in HTTP/
HTTPS packets transmitted by Proxy 
server

(optional).

esr(config-subscriber-
control)# ip proxy 
source-address <ADDR>

<ADDR> – source IP address, 

defined as AAA.BBB.CCC.DDD 
where each part takes values of 
[0..255];

35

Specify URL address of the server 
providing lists of traffic filtration 
applications

(optional)

esr(config)# 
subscriber-control 
apps-server-url <URL>

<URL> – reference address, set by 

the string from 8 to 255 characters.

36

Enable the application control on the 
interface

 (optional)

esr(config-if-gi)# 
subscriber-control 
application-filter 
<NAME>

<NAME> – application profile name, 

set by the string of up to 31 
characters.

37

Set/clear the upper bound of BRAS 
sessions amount (optionally)

esr(config-subscriber-
control)# thresholds 
sessions-number high

  <Threshold>

          

       

<Threshold> – BRAS sessions 
amount, [0-50000] – for ESR-1700

[0-10000] – for 

ESR-1200/1000

[0-1000] – for ESR-100/200

38

Set/clear the lower bound of BRAS 
sessions amount (optionally)

esr(config-subscriber-
control)# thresholds 

sessions-number low 
 <Threshold>

<Threshold> – BRAS sessions 
amount, [0-50000] – for ESR-1700

[0-10000] – for 

ESR-1200/1000

[0-1000] – for ESR-100/200

Summary of Contents for ESR-10

























































































































































































































































































































































































































































Reviews:

No comments