manualshive.com logo in svg

ELTEX ESR-10, User Manual, Page: 18 / 440

Share
Download
ELTEX ESR-10 User Manual Download Page 18

ESR service routers. ESR-Series. Functionality description. Version 1.12.0

18

•
•
•
•
•
•
•
•

•

Step

Description

Command

Keys

6

Set the DSCP value (optional).

esr(config-net-
policy)# dscp <DSCP>

<DSCP> – DSCP code value, takes 

values in the range of [0..63].

7

Set the CoS value (optional).

esr(config-net-

policy)# priority  

<PRIORITY>

<COS> – priority value, takes the 

following values:

best-effort – COS0;
background – COS1;
excellent-effort – COS2;
critical-applications – COS3;
video – COS4;
voice – COS5;
internetwork-control – COS6;
network-control – COS7.

8

Set VLAN ID value.

esr(config-net-
policy)# vlan <VID> 
[tagged]

<VID>  – VLAN ID, takes values of 

[1..4094];

tagged

 – key, during the 

installation of which, the 
subscriber device will send 
Ethernet frames of the specified 
application in a tagged form.

9

Set a network policy on the 
interface.

esr(config-if-gi)# 
lldp network-policy 
<NAME>

<NAME> – network-policy name, set by 

the string of up to 31 characters.

2.3.2  Voice VLAN configuration example

Voice VLAN — VLAN ID, in receiving of which an IP phone switches to the trunk mode with the specified VLAN 

ID for VoIP traffic reception and transmission. VLAN ID transmission is performed by LLDP MED 
enhancement.

Objective:

VoIP traffic and data traffic  should be grouped in different VLANs - vid 10 for data and vid 20 for VoIP - and 

the sending of Voice VLAN from the gi 1/0/1 ESR port should be configured. Voice VLAN should be supported 
and enabled on the IP phone.

Solution:

First create VLAN 10 and 20 and configure the gi 1/0/1 interface in the trunk mode:

Summary of Contents for ESR-10

























































































































































































































































































































































































































































Reviews:

No comments