manualshive.com logo in svg

ELTEX ESR-10, User Manual, Page: 355 / 440

Share
Download
ELTEX ESR-10 User Manual Download Page 355

ESR service routers. ESR-Series. Functionality description. Version 1.12.0

355

•

•

•

•

•

•

Step

Description

Command

Keys

esr(config-ipv6-dhcp-
server)# dns-server 
<IPV6-ADDR>

<IPV6-ADDR> – DNS server IPv6 

address, defined as X:X:X:X::X where 
each part takes values in hexadecimal 
format [0..FFFF]. You can specify up 
to 8 IP addresses separated by 
commas.

10

Specify maximum IP addresses 
lease time (optionally).

If DHCP client requests the lease 
time that exceeds a maximum 
value, the time specified by the 
command will be set.

esr(config-dhcp-
server)# max-lease-
time <TIME>

<TIME> – maximal IP address lease 

time, sets in format DD:HH:MM, 
where:

DD – amount of days, takes 

values of [0..364].

HH – amount of hours, takes 

values of [0..23].

MM – amount of minutes, 

takes the value of [0 ..59].

Default value: 1 day

esr(config-ipv6-dhcp-
server)# max-lease-
time <TIME>

11

Specify the lease time for which a 
client will be given IP address 
(optionally).

This time will be used if a client did 
not request the certain lease time.

esr(config-dhcp-
server)# default-
lease-time <TIME>

<TIME> – maximal IP address lease 

time, sets in format DD:HH:MM, 
where:

DD – amount of days, takes 

values of [0..364].

HH – amount of hours, takes 

values of [0..23].

MM – amount of minutes, 

takes the value of [0 ..59].

Default value: 12 hours.

esr(config-ipv6-dhcp-
server)# default-
lease-time <TIME>

12

Create supplier class identifier 
(DHCP Option 60) (optionally).

esr(config)# ip dhcp-
server vendor-class-id 
<NAME>

<NAME> – carrier class identifier, set 

by the string of up to 31 characters.

esr(config)# ipv6 
dhcp-server vendor-
class-id <NAME>

13

Specify specific supplier 
information (DHCP Option 43).

esr(config-dhcp-
vendor-id)# vendor-
specific-options <HEX>

<HEX> – vendor-specific information, 

specified in hexadecimal format up to 
128 symbols.

esr(config-ipv6-dhcp-
vendor-id)# vendor-
specific-options <HEX>

Summary of Contents for ESR-10

























































































































































































































































































































































































































































Reviews:

No comments