ESR service routers. ESR-Series. Functionality description. Version 1.12.0
179
•
•
•
•
•
•
•
•
•
Step
Description
Command
Keys
23
Enable the use of TLV#8 in hello
packets (optional).
esr(config-if-gi)# isis
hello-padding
24
Set the priority when selecting DIS
(optional).
esr(config-if-gi)# isis
priority <VALUE>
[<LEVEL>]
<VALUE> – number, may take values
[0..127];
<LEVEL> – IS-IS protocol operation
level:
level-1 – operate only on level
1;
level-2-only – operate only on
level 2.
25
Set the metric value for the
interface (optional).
esr(config-if-gi)# isis
metric <VALUE>
[<LEVEL>]
<VALUE> – number, may take values
[1..16777215];
<LEVEL> – IS-IS protocol operation
level:
level-1 – operate only on level
1;
level-2-only – operate only on
level 2.
26
Set defines which routing layer on
the interface the current IS-IS
process will run on (optional).
esr(config-if-gi)# isis
circuit-type {<LEVEL>}
<LEVEL> – IS-IS protocol operation
level:
level-1 – operate only on level
1;
level-1-2 – operate on levels 1
and 2;
level-2-only – operate only on
level 2.
27
Set the interval for sending hello
packets (optional).
esr(config-if-gi)# isis
hello-interval <TIME>
[<LEVEL>]
<TIME> – time in seconds, takes
values of [1..65535];
<LEVEL> – IS-IS protocol operation
level:
level-1 – operate only on level
1;
level-2-only – operate only on
level 2.