ELTEX ESR-10, User Manual, Page: 404 / 440

ESR service routers. ESR-Series. Functionality description. Version 1.12.0
404
Step Description Command Keys
23 Enable user control on the interface. esr(config-if-gi)#
service-subscriber-
control
{any| object-group
<NAME>}
<NAME> – IP addresses profile
name, set by the string of up to 31
characters.
24 Enable iterative query of quota value
when it expires for user services with
a configured restriction on the
amount of traffic or time
(optional).
esr(config-subscriber-
control)# quota-
expired-reauth
25 Enable session authentication by IP
address.
(optional)
esr(config-subscriber-
control)# session ip-
authentication
26 Enable transparent transmission of
backup traffic for BRAS
(optional).
esr(config-subscriber-
control)# backup
traffic-processing
transparent
27 Specify the interval after which
currently unused URL lists will be
removed.
(optional).
esr(config)#
subscriber-control
unused-filters-remove-
delay
<DELAY>
<DELAY> – time interval in seconds,
takes values of [10800..86400].
28 Specify the interval after which, if a
user has not sent any packets, the
session is considered to be outdated
and is removed from the device.
(optional).
esr(config-subscriber-
default-service)#
session-timeout
<SEC>
<SEC> – time interval in seconds,
takes values of [120..3600].
29 Specify the VRRP group on the basis
of which user control service status
is determined (primary/redundant)
(optional).
esr(config-subscriber-
control)# vrrp-group
<GRID> <GRID> – VRRP router group
identifier, takes values in the range
of [1..32].
30 Define destination TCP ports from
which the traffic will be redirected to
the router HTTP Proxy server
(optional).
esr(config-subscriber-
control)# ip proxy
http listen-ports
<NAME> <NAME> – TCP/UDP ports profile
name, set by the string of up to 31
characters.