manualshive.com logo in svg

ELTEX ESR-10, User Manual, Page: 269 / 440

Share
Download
ELTEX ESR-10 User Manual Download Page 269

ESR service routers. ESR-Series. Functionality description. Version 1.12.0

269

Step

Description

Command

Keys

13

Enable the blocking of TCP packets, 
with the SYN and FIN flags set.

esr(config)# ip 
firewall screen spy-
blocking syn-fin

14

Enable the blocking of TCP packets, 
with all flags or with the set of flags: 
FIN, PSH, URG. The given command 
provides the protection against 
XMAS attack

esr(config)# ip 
firewall screen spy-
blocking tcp-all-flag

15

Enable the blocking of TCP packets, 

with the zero “flags” field.

esr(config)# ip 
firewall screen spy-
blocking tcp-no-flag

16

Enable the blocking of fragmented 
ICMP packets.

esr(config)# ip 
firewall screen 
suspicious-packets 
icmp-fragment

17

Enable the blocking of fragmented 
IP packets.

esr(config)# ip 
firewall screen 
suspicious-packets ip-
fragment

18

Enable the blocking of ICMP packets 
more than 1024 bytes.

esr(config)# ip 
firewall screen 
suspicious-packets 
icmp-fragment

19

Enable the blocking of fragmented 
TCP packets, with the SYN flag.

esr(config)# ip 
firewall screen 
suspicious-packets 
syn-fragment

20

Enable the blocking of fragmented 
UDP packets.

esr(config)# ip 
firewall screen 
suspicious-packets 
udp-fragment

21

Enable the blocking of packets, with 
the protocol ID contained in IP 
header equal to 137 and more.

esr(config)# ip 
firewall screen 
suspicious-packets 
unknown-protocols

22

Set the frequency of notification (via 
SNMP, syslog and in CLI) of 
detected and blocked network 
attacks.

esr(config)# ip 
firewall logging 
interval <NUM>

          

       

<NUM> – time interval in seconds 

[30 .. 2147483647]

Summary of Contents for ESR-10

























































































































































































































































































































































































































































Reviews:

No comments