background image

11 

Elterm M.M.Kaszuba Sp.J., ul. Przemyslowa 5, 86-200 Chelmno 

 

 

   Boiler’s type, serial number, production date 

Date of sales 

   Legible stamp of a retail outlet and signature 

 

 

 

Unless the above stamps are present the guarantee is invalid 

 

GUARANTEE 

1.

 

Guarantee for trouble-free operation is valid for a period of 24 months (12 months for 

AsMB

). 

2.

 

Guarantee expires if any alterations are made to the product without the manufacturer’s consent, or if assembly or use are 

not in accordance with the enclosed operation manual and terms and conditions of guarantee. 

3.

 

Guarantee repairs are made by the manufacturer or persons/companies authorized by the same.  

4.

 

If filled out incompletely, the guarantee is invalid. 

5.

 

If the serviceperson discovers machine failure resulting from the user’s fault (e.g. improperly made wiring system, air-locked 

central heating system, use or assembly that is not in compliance with the user manual etc.), or in the event the guarantee is 

invalid, the costs of repair and travelling are borne by the claimant.  

6.

 

Failure on the part  of the user to follow the  serviceperson’s recommendations provided in the  guarantee repair  protocol 

results in the guarantee being suspended until such recommendations are implemented. 

 

Do not call servicemen without becoming fully familiarized with the boiler user manual, as well as conditions of guarantee 

and assembly

Before you call service, read the section 

„TROUBLESHOOTING

 

 

Stamp of serviceman, short description of repair and recommendations for the user

 

 

 

 

Following guarantee repair by the serviceman, one of the below guarantee coupons to be cut off, filled out and handed to the serviceman 

Guarantee coupon I 

 

…………………………….…………………………………………………………………………………………………………………………… 

Full name and address of the boiler owner  

 
 

…………………………….…………………………………………………………………………………………………………………………… 

Postal code, town /Boiler owner tel. no.  

 
 

…………………………….…………………………………………              ………………………………………………………… 

                                                                              

Production date                Boiler serial no.

 

Guarantee coupon II 

 

…………………………….…………………………………………………………………………………………………………… 

Full name and address of the boiler owner  

 
 

…………………………….…………………………………………………………………………………………………………………………… 

Postal code, town /Boiler owner tel. no.  

 
 

…………………………….…………………………………………              ………………………………………………………… 

          

Production date                Boiler serial no

 

 

Summary of Contents for redline asbill













Reviews: