Quick start guide Eltako GFVS-Touch
6
4. The first start
First the Eltako GFVS-Touch should be connected to the power supply system. Then you can turn on the
Eltako GFVS-Touch. During startup you will see the following dialog:
Figure 5: Startup view
If necessary, you can change this into the recovery mode to restore a system backup. If no entry is made the
Eltako GFVS-Touch will be startet after 10 seconds.
A Linux operating system and the Eltako GFVS 3.0 software are already installed. Eltako GFVS 3.0 software launches
automatically after switching on.
Figure 6: Start of the Eltako GFVS 3.0 software
