Assembly Instructions
6
b)
Next place the seeder slides in the shallow slots they run in on the seeder assembly (see Figure
4). The side of the seeder slide with the larger flange and the two holes should be closer to the
front of the machine.
c)
After that, place the bait box on top of seeder slides. The bait box should face with the clear
viewing windows facing toward the front of the machine as shown in Figure 5 and be secured
with the four hex nuts.
d)
Attach the other side of the springs installed in step 2a to the holes on the seeder slides. Once
the step is done, the unit should look like it does in Figure 6.
Figure 4: Seeder Assembly Area on GA-800
Figure 5: Inside of Plastic Bait Box
