Motor control unit IMSG-UC-2H • Status 02/08/2011 • Subject to technical changes. Errors excepted.
3
If the
Latch mode
is active, the
Network LED
is on.
If the
Deadman mode
is active, the
Network LED flashes
every second.
Change the operating mode by pressing
(channel 1) and
(channel 2) again.
Individual operation
Manual individual operation of the drives can take place via the integrated Up/Down
buttons at the device or via unlocked double buttons (extension inputs). The movement
mode can be stopped via both buttons (
or ), regardless of the current direction of
movement.
LED signals during manual control:
During movement:
Channel LED in the direction of movement flashes every second
Runtime reached
without interruption:
LED for the direction travelled remains on
Intermediate position
reached:
LEDs off
Manual operation can be set to “Standard mode” or “Comfort mode”:
Standard mode (default)
•
If a button is pressed for less than 1 second, the drive will move in a step-by-step
fashion. This allows, for example, slats to be positioned precisely.
•
If a button is held for longer than 1 second, the drive moves to its final position
(switching off after 240 seconds of maximum runtime)
This is how you set the Standard mode:
•
Press the
button on the channel to be set for 5 seconds and then additionally the
button for longer than 1 second
•
To confirm the On LED on the channel flashes 5 times
Comfort mode:
•
If a button is held for less than 0.3 seconds, the drive moves to its final position
(switching off after 240 seconds of maximum runtime)
•
If a button is held for longer than 0.3 seconds, but less than 2 seconds, the drive
moves only while the button is pressed and stops immediately when it is released
(deadman function)
•
If a button is held for longer than 2 seconds, the drive moves to its final position
(switching off after 240 seconds of maximum runtime)
This is how you set the Comfort mode:
•
Press the button on the channel to be set for 5 seconds and then additionally the
button for longer than 1 second
•
To confirm the Off LED on the channel flashes 5 times