27
5. Sending of meteorological and automatic data
After the setting of the operating command in case of wind or rain alarm, you may now
select, whether the meteorological data and the automatic commands of Arexa shall be
submitted by radio to the motor control units of system XS.
Leave this display at
if Arexa is used as conventional single-channel control
system. The function „Sending of weather and automatic data“ must only be activated if
Arexa shall cooperate with motor control devices (e.g. XS MSG2-AP) in the control
system XS.
Press the key
in order to switch between the displays Off and On.
Select
if no meteorological data and automatic commands shall be sent (setting
for conventional window control) or
if the meteorological data and the automatic commands of the Arexa shall
be sent to motor control devices of system XS (setting for the use in the
control system XS).
This setting offers the option to centrally operate all drive mechanisms in
system XS from the Arexa operating unit (see chapter “Manual
operation”).
Press the
key in order to access the next setting step.
