3
Description
The Arexa window control system has been developed for the automatic control of a
window (or a group of windows) and for comfortable manual operation. The control
system offers a highest degree of flexibility for installation and setting and may
therefore be adjusted individually to different conditions. Please use this instruction
manual in order to adjust the automatic function to your requirements.
Scope of supply
•
Weather
station
•
Operating unit (incl. 2 batteries)
Commissioning procedure
Installation, inspection, commissioning and troubleshooting
of the control system must only be arried out by a competent
electrician.
Proceed as follows when commissioning the Arexa control system:
1.
Installation and connection (see chapter „Installation and commissioning")
2.
Basic setting (see chapter „Basic settings“)
3.
Setting of the automatic (see chapter „Setting of automatic")
Options for connection and control
A drive mechanism for windows may be connected to the Arexa control system. If
several windows shall be controlled together, the connection via a group control relay is
possible.
The connected drive (or drive group) may be operated manually with the operating unit.
A suitable radio remote control (Remo 8) and a radio push-button interface (RF B2-UP)
are available in addition (option).
An operating device and an additional remote control Remo 8 or a pushbutton interface
RF-B2-UP can be operated with the weather station (maximum two radio controlled
participating devices at the weather station).
The following
environmental parameters
are measured and displayed:
•
Outdoor and indoor temperature
•
Lightness
