background image

 

iS330/iS330D

 

SWING

 

GATE

 

OPENER

 

MANUAL

 

1.1 GENERAL PRECAUTION

 

 
WARNING: 

This user manual is only for qualified technicians who are specialized in 
installations and automations. 

1)  All installations, electrical connections, adjustments and testing must be 

 performed only after reading and understanding of all instructions carefully. 

2)  Before carrying out any installation or maintenance operation, disconnect the 

 electrical power supply by turning off the mains switch connected upstream 
 and apply the hazard area notice required by applicable regulations.  

3)  Do not install this equipment in an easily flammable environment. The presence of 

inflammable gases or smoke are a serious threat to personal safety. 

4)  In addition to safety devices it is also necessary to install at least one light signal 

as well as a printed notice fixed to the gate. 

5)  Make sure the existing structure is up to standard in terms of strength and 

 stability. 

6)  This equipment must be earthed with a yellow/ green cable, connected to the earth 

terminal in the junction box. The safety of this product is only guaranteed if the 
equipment is properly earthed

.

 

7) Installation 

requires 

qualified personnel with mechanical and electrical skills. 

8)  Keep the automatic controls (remote, push buttons, key selectors etc.) placed 

 properly and way from children. 

9)  For replace or repair of motorized system, only original parts must be used. 

 Any damage caused by inadequate parts and methods will be not claimed to 
 motor  manufacturer. 

10) Never operate the drive if you suspect that it might be faulty or will cause 

 damage to the system. 

11) The motors are exclusively designed for gate opening and closing application, 

 any other usage is deem inappropriate. The manufacturer will not be liable for 
 any damage resulting from the improper use. Improper usage should void all 
 warranty, and the user accepts sole responsibility for any risks thereby may 
 accrue. 

12) The system may be operated in proper working order. Always follow the 

 standard procedures by following the instructions in this installation and 
 operating  manual. 

13) Only operate the remote when you have the full view of the gate. 

 

ELSEMA PTY LTD shall not be liable for any injury, damage, or any claim to any 
person or property which may result from improper use or installation of this 
system. 

Please keep this installation manual for future reference. 

 

1

 

Summary of Contents for Intelligent Swing iS330
















Reviews: