ELSA Lancom DSL/10 Office Manual Download Page 78

Page: 78 / 106

Description of the menu options

ELSA LANCOM DSL/10 Office

R22

Status/Queue-statistics

These statistics allow you to observe the flow of the individual packets through the
various modules of the

ELSA LANCOM

Rx-bad

Number of faulty packets received

AC-name

Name of selected access concentrator

Service

Name of negotiating service

/Queue-statistics

Statistics on the queue

LAN-heap-packets

Number of buffers available

LAN-queue-packets

Number of buffers in use

WAN-heap-packets

Number of buffers available

WAN-queue-packets

Number of buffers in use

ARP-query-queue-packets

Number of ARP packets in the query queue

ARP-queue-packets

Number of ARP packets in the normal queue

IP-queue-packets

Number of IP packets in the normal queue

IP-urgent-queue-packets

Number of IP packets in the secured queue

ICMP-queue-packets

Number of ICMP packets

TCP-queue-packets

Number of TCP packets

TFTP-queue-packets

Number of TFTP packets

SNMP-queue-packets

Number of SNMP packets

Prot-heap-packets

Number of prot heap packets

IPr-queue-packets

Number of packets remaining to be processed by the
IP router.

DHCP-server-queue-packets

Number of packets in the receive queue of the
DHCP server.

IPr-RIP-queue-packets

Number of packets in the receive queue of the IP-RIP
module (for RIP queries, RIP propagations...).

DNS-tx-queue-packets

Number of packets to be forwarded to DNS or
NBNS servers.

DNS-rx-queue-packets

Number of packets that come from DNS or
NBNS servers and are to be forwarded to the host.

IP-Masq.-tx-queue-packets

Number of packets to be sent masked (to the
Internet).

IP-Masq.- Rx-queue-packets

Number of packets received from the Internet and
have to be demasked.

/PPPoE-statistics

Statistics on special PPP over Ethernet packets

Summary of Contents for Lancom DSL/10 Office











































































































Search results

Summary of Contents for Lancom DSL/10 Office

Reviews:

Related manuals for Lancom DSL/10 Office

Brands by name

Popular brands

ELSA Lancom DSL/10 Office, Manual

Search results

Summary of Contents for Lancom DSL/10 Office

Reviews:

Related manuals for Lancom DSL/10 Office

Brands by name

Popular brands