Description of the menu options
ELSA LANCOM DSL/10 Office
R46
Enter the name of the domain to be prohibited in the 'Domain' field. Wildcards such as
'?' and '*' may be used. The wildcard '?' replaces exactly one character, while '*' can
stand for a random number of characters. Multiple instances of the wildcard '*' can be
used. For example, *xxx* filters all names containing the letters xxx in any position
within the name.
The IP address and subnet mask fields can be used to specify the subnet for which the
domain will be prohibited.
The filter table is sorted according to the subnet masks in descending order (the longest
at the top); entries with identical subnet masks are sorted according to the IP addresses
in ascending order. In the event of identical IP addresses, the entries are sorted in
ascending order according to the domain to be prohibited.
The table is searched from top to bottom and an error message is returned to the
requesting computer in the event of a match.
Setup/Config-module
This menu allows you to enter settings for router configuration options. The menu has
the following layout:
LAN-config
This option allows you to define whether remote configuration from the LAN side is
possible (
On
), is not possible (
Off
), or is possible only in read mode (
Read
). The default
setting for this option is
On
.
WAN-config
This option allows you to define whether remote configuration from the WAN side is
possible (
On
), is not possible (
Off
), or is possible only in read mode (
Read
). The default
setting for this option is
Off
.
Password-
required
This specifies whether a new password should be requested every time a remote
configuration is begun (
On
), or the password request should be suppressed (
Off
). The
default setting for this option is
On
.
/Config-module
Configuration module settings
LAN-config
Switch for configuring from the LAN side
WAN-config
Switch for configuring from the WAN side
Password-required
Password required on/off if there is no password
Maximum-connections
Maximum number of simultaneous connections
Config-aging-minute(s)
Time limit for remote configuration connections
Login-errors
Number for failed login attempts before the login block is
activated
Lock-minutes
Duration of block and period until old login errors are
forgotten.
Language
Configuration language
