Description of the menu options
ELSA LANCOM DSL/10 Office
R12
Status/PPP-statistics/Rx- and Tx-options
The PPP statistics options show what information was exchanged during the negotiation
over LCP or IPXCP.
Rx-options
This shows information on what the remote station requested (LCP) or what was
assigned to the router (IPCP).
Tx-options
This shows information on what the router requested from the remote station (LCP) or
what it assigned to it (IPCP).
The two submenus have the same layout:
The LCP table has separate listings for every channel:
Tx-config-request
Number of CCP queries sent
Tx-config-ack.
Number of CCP queries accepted by the remote station
Tx-config-nak.
Number of CCP queries rejected by the remote station because of
parameters not being accepted.
Tx-config-reject
Number of CCP queries rejected by the remote station for other reasons.
Tx-terminate-request
Number of CCP queries sent after releasing the compression.
Tx-terminate-ack.
Number of CCP confirmations sent for releasing the compression.
Tx-code-reject
Number of CCP queries rejected because the
ELSA LANCOM
does not wish
to use compression (by layer list settings).
Tx-reset-request
Number of CCP queries sent after synchronizing the compression (e.g. after
transfer errors)
Tx-reset-ack.
Number of CCP confirmations sent for synchronizing the compression
Delete-values
Deletes CCP statistics.
/Rx- and Tx-options
Display
LCP
Information on packet sizes, control characters, security
procedures and callback
IPCP
Information on addresses in the IP network
MRU
M
aximum
R
eceive
U
nit designates the maximum packet size that the remote station
can receive
Auth.
Authentication procedure used (PAP/CHAP)
Magic-Num
Magic Number used to detect loops
