Battery Charging
Your eTouch has a built in rechargeable lithium battery which is
supplied with no charge in for transportation reasons. We recommend
that you charge the battery for around
8 Hours
for its first charge, to
achieve the best battery life. You can still use the eTouch but it‟s best to
keep it plugged in for this charging period.
To maximise your battery life it‟s recommended that you always
fully
charge the battery and then use the eTouch unplugged until the
battery power is low, at which point you can recharge the battery.
Using
full charging and draining cycles
is much better than charging
the battery bit by bit.
To charge the battery
, simply connect the power adaptor to your mains
wall socket and the DC Power Input and switch it on.
The LED Battery Indicator (at the top right of the eTouch) will
illuminate red.
Once the battery is fully charged the LED will turn off.
You can see the battery charge status in the menu bar at the
top of your eTouch‟s screen.
NOTE:
The LED will illuminate Blue when the eTouch is powered
ON (even when in standby mode). It will show Blue and Red
when powered ON and charging.
Battery Icon
The Battery icon shows in the menu bar at eth
top of your screen. It shows the amount of charge in your
battery. When the lightning symbol shows it means the
battery is still charging.
Only use the authorised Elonex power adaptor as supplied in your
package.
Summary of Contents for eTouch 10" Wi-Fi Android Tablet | 1000ET
Page 1: ......
