Instruction manual
I ELOshield
Rev. 20
09.03.2020
Page 46 of 85
Figure 18.
Circuit diagram of the system components
Each antenna module (A/B) requires a unique hardware
CAN ID
to be set. The procedure is
described in the previous chapter.
7.5.1
Connecting the power supply
The stationary module requires power supply from the 110 V / 230 V alternating voltage source or
the stabilized 24 V direct voltage source. The selected voltage source shall be connected to the
correct screw connection on the right side of the device.
110 / 230 V AC
Stationary antenna
module (A/B) #1
Stationary antenna
module (A/B) #2
Power Supply
Antenna port 1
Antenna port 2
Communication port RS 232
Cable glands for connection of relay 1-4
