Instruction manual
I ELOshield
Rev. 20
09.03.2020
Page 29 of 85
Figure 8.
Custom shaped zones – position, size and shape of the zones are configurable.
Due to accuracy reasons fringes as depicted in the 2 pictures above cannot be exactly defined and
may differentiate during operation.
More technical info about accuracy can be found in chapter 12.1
Figure 9.
The vehicle antenna module (A) with the cover removed and the switch
marked in red provided to set the CAN ID address
The vehicle module is connected to the vehicle antenna modules (A) using the CAN bus. In order to
make connection, the unique CAN ID address should be correctly configured in each of the vehicle
antenna modules (A). In order to do so, the cover should be removed by loosening 4 bolts, the
unique address should be set in the switch and the cover should be replaced.
