Instruction manual
I ELOshield
Rev. 20
09.03.2020
Page 26 of 85
6.5.1
Vehicle modules
Vehicle modules can be installed according to personal preferences. The modules can be screwed
to the vehicle, or optionally fixed with RAM Mount clamps or suction caps.
In front of the driver, in the drivers view:
On the dashboard
At the pillar
On the window
Out of the drivers view:
Beside/below the seat
In the engine compartment
Vehicle module on a dashboard
Vehicle module with RAM Mount/Suction cap
6.5.2
Antenna modules (A)
1 - 4 vehicle antenna modules (A) should be installed depending on a vehicle type to generate
corresponding zones around the vehicle. The devices should be installed with the following
guidelines considered:
The antenna modules are delivered with an adjustable bracket, which must be screwed to
the truck (screws are not included in scope of delivery), or, alternatively attached with a
magnet (optionally available).
The vehicle antenna modules (A) should be installed in a visible place without metal
obstacles, which may obscure signal emission. (Example: on the roof, nearby mirrors or
lights)
Optimally, the vehicle antenna modules (A) should be located around the outline of the
vehicle, as far away from each other as possible, as close as possible to the potential hazard.
The vehicle antenna modules (A) should be installed upright so as cable connectors are
pointing the floor.
The vehicle antenna modules (A) should not be installed in places obscured by metal objects.
