Elo TouchSystems Entuitive 1229L, User Manual

Page: 31 / 249

2-26
E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e
Rear Facing Customer Display
Serial Customer Display
The serial customer displays do not need drivers. To get an image on the
display:
1
Plug the DB-9 connector into serial port COM1 of computer.
2
Plug the RJ-45 cable into display.
3
In windows click on Start > Run
4
Enter cmd > OK
5
Type MODE COM1 96,N,8,1 > Enter
6
Type TYPE CON > COM1 > Enter
7
Type ELO > Enter
The display will show ELO.
USB Customer Display
Plug in the USB cable attached to the Customer Display unit. The New
Hardware Wizard dialog box will appear.
1
Choose Next and select "Search for the best driver for your device
(Recommended)" then choose Next .
2
When a list of search locations is displayed, place a checkmark on the drive
containing the driver package:
Touch Monitor Peripherals\Rear Facing Customer
Displays\Drivers\xxx\LCLD9.sys, where xxx is Win98 for a Windows 98 based
system or 2000 for a Windows XP/2000 based system.
3
Insert the disk into your drive. (If the driver files have been copied to your
hard drive or have been distributed on CD, place a checkmark on "Specify a
location" and browse to select the directory containing the driver files.)
4
Choose Next . Once the Customer Display driver has been detected choose
Next again.
5
Wait while driver files are copied to your computer.
6
Insert your Windows CD if prompted and choose Finish