Elo TouchSystems Entuitive 1229L, User Manual

Page: 30 / 249

2-25
Magnetic Stripe Reader
No drivers are needed.
Testing the Serial Version:
1
Insure the MSR serial is connected. (Make a note of the serial port, COM1,
COM2, etc. it is connected to.)
2
Launch HyperTerminal
3
Go to file > new connection and type “ MSR ” then select OK .
4
In the Connect to Menu select Com port used in step one, then select OK .
5
In the Connection Property box set the following values:
•
Bits per second to 9600
•
Data Bits to 8
•
Parity to None
•
Stop bits to 1
•
Flow control to Hardware
The device will immediately display the serial number. Slide any credit card
through the MSR to view the data.
Testing the USB MSR Keyboard Emulation
1
Plug in the device.
2
Open MS Word.
3
Slide the card through the MSR to view the data.
Testing the USB-HID Class MSR
1
On the CD, browse to Touch Monitor Peripherals\Magnetic Stripe Card
Readers\Demo.
2
Open the Readme.txt and follow instructions to test the unit.