Elo TouchSystems Entuitive 1229L, User Manual

Page: 188 / 249

Appendix A. Installation and Setup
65
19. Click the “ Next ” button to advance to the next input screen.
20. Click on " Yes " to the "Digital Signature Not Found".
21. Click "Finish".
22. Click "Close" on the "System" dialog.
23. Answer " Yes " to the "Restart System" prompt.
Note
If, during the installation, a strange behavior is observed - failure,
or some other unexpected error
−
a system reboot is necessary
before continuing or repeating the failed operation.
Uninstalling the Drivers (W2000/XP)
Close any application that may have the MTD driver open before attempting to uninstall it.
Failure to do this will cause the uninstallation to fail
−
after that the system must be re-booted
before a subsequent attempt to uninstall the driver could be performed.
The driver can be uninstalled by using the Windows Installation Wizard. Open the Wizard by
double-clicking on the Add/Remove Programs icon in the Control Panel. On the Install/Uninstall
tab, find and select the entry that reads
Mag-Tek Device Drivers (MTD) - uninstall
then click on the Add/Remove button. Administrative privilege is required to perform this
operation. The uninstallation removes all MTD files and adjusts the registry as required.
Uninstalling the Keyboard Hook Driver (W2000/XP)
For Windows 2000/XP, the keyboard hook driver must be uninstalled after the driver binaries
(cf. above) are uninstalled and before rebooting.
1. Open the Control Panel and double click on the “System” icon.
2. Click on the "Hardware" tab.
3. Click on the "Device Manager" button.
4. Click on the ‘+’ to expand the "Keyboards" entry in the Device Manager list.
5. Right click on the "PC/AT Enhanced PS/2 Keyboard (101/102-Key)" entry.
6. Click the "
Properties" item in the dialog box.
7. Click on the "Driver" tab.
8. Click the "Update Driver" button.
9. Click the “
Next ” button to advance to the first input screen.
10. Select the "Search for a suitable driver… " radio button.
11. Click the “
Next ” button to advance to the next input screen.