Gold Solo Double Twitter Installation Guide
MAN-G-SOLTWIB_160 (Ver. 1.005)
|
J10 VL and Feedback Connector|
www.elmomc.com
44
Table of Contents
8.3.2.2.
Interpolated Analog Encoder
Figure 23: Port B - Interpolated Analog Encoder Connection Diagram
For short distances between the drive and control, 0.5 to 1.0 m wires can be used and shielding is
not required.
For longer distances than 1.0 m and/or high EMI environment, shielded and twisted
wires should be used. Drain wires should be connected to Elmo COMRET.