elmeg CS400xt, Operating Instructions Manual

Page: 15 / 250

Making Calls
Starting a call
Dial number - no correction possible
b t g
Dial number
Dial number - correction possible
a t b g
Dial number
To change the number or to correct a wrong entry, select the wrong figure with the arrow buttons and press
C key to delete it. Now enter the correct number.
If you wish to conduct the call using the handset, just lift it up after dialing the number. Any time during a
call you can switch back and forth between hands-free calling, speaker function and use of the handset.
After you have dialed the number you can also press the speaker button to have the number dialed and to
use hands-free calling.
If a call can not be put through (e.g. number is inhibited via the dial ranges control, or the account for the
number/MSN is empty), a corresponding message will appear in the display. For example: »
Inhibit.
: MSN ext.
«, when the dial range filter is active.
Other options for dialing without lifting the handset
The option of dialing without lifting the handset and of correcting or adding to a number also exists during
dialing:
• from the redialing memory.
• from the caller/ memo list.
•
from the telephone directory.
• from the VIP memory.
• from the direct dialing memory.
• via CTI, TAPI (CS 410) features.
If you are using one of these options, you can make further entries prior to initiating the call. You can define
which number (MSN), if any, is to be transmitted to the party being called.
Dialing from the pabx telephone directory
When you use this telephone with a system telephony supporting pabx system, you can dial from the tele-
phone directory of the pabx.
a
R s
t
O <> O
b
Tel.
drctry
Enter first
letter
Select
entry
English
11