background image

14

ELMEC INC. LIMITED WARRANTY 

What does this warranty cover? 

This warranty covers any defects or malfunctions of your new EVduty EVC30T Electric Vehicle Charging Station. 

How long does the coverage last? 

This warranty runs for 3 years from the purchase date. 

What will Elmec Inc. do? 

Elmec Inc. will repair any EV-Duty EVC30T Electric Vehicle Charging Station judged to have a defect or malfunction as long as the seal on the cover is not broken. 

In the event repair is not possible, Elmec Inc. will replace the EVduty EVC30T Electric Vehicle Charging Station with a new one of similar specifications and price.

What does this warranty not cover? 

This warranty will be void in the case the EV-Duty EVC30T Electric Vehicle Charging Station being opened in any manner so that the internal components are 

accessible. The cover is sealed with the rear plate by using rivets and sealant.

How to get service? 

To use this warranty, you must contact the Elmec Inc. Support Service, and a qualified technician will verify if there is a real problem with your EVduty EVC30T Electric 

Vehicle Charging Station. If it’s the case, send the EVduty EVC30T Electric Vehicle Charging Station postage paid with proof of purchase

 

including serial number

 to the 

following address: 

ELMEC INC. SERVICE SUPPORT 

1141, 2

e

 avenue, Grand-Mère (Québec)  G9T 2X9

 

Mobile (24/7): 1 819 531-0819 (calls and text messages)

 

Facebook: Jean-Marc Pittet

Elmec Inc. will inspect the EV-Duty EVC30T Electric Vehicle Charging Station and contact you within 72 hours following the product reception to tell you if the 

product will be repaired or replaced. 

Your rights under the actual applicable law: 

This warranty gives you specific legal rights, and you may also have other rights which vary from one province to another.

Summary of Contents for EVC30T

















Reviews: