background image

2

The Elmec Inc. 

EVC30T/EVC30T-IN 

is a Level 2 Electrical Vehicle Charging Station. Its primary function is to send electrical power 

to an electric vehicle that is equipped with the SAE J1772

TM

 Electric Vehicle connector. There are different models of this charging station:

Can be used in wet location (UL/CSA type 3R, 4, 4X enclosure) 

25’ (7.6 m) Output Cable SAE J1772

TM

30A Output Current (40A circuit breaker)

Electrical installation require a junction box 

Fixed and permanent installation 

Can be used in wet location (UL/CSA type 3R, 4, 4X enclosure) 

25’ (7.6 m) Output Cable SAE J1772

TM

30A Output Current (40A circuit breaker)

Electrical installation with a NEMA 6-50P 240V plug on input cable

Portable model, non-permanent installation 

MODEL

MODEL

4

5

OVERVIEW

Can be used in wet location (UL/CSA type 3R, 4, 4X enclosure) 

15’ (4.6 m) Output Cable SAE J1772

TM

30A Output Current (40A circuit breaker)

Electrical installation require a junction box 

Fixed and permanent installation 

Can be used in wet location (UL/CSA type 3R, 4, 4X enclosure) 

15’ (4.6 m) Output Cable SAE J1772

TM

30A Output Current (40A circuit breaker)

Electrical installation with a NEMA 6-50P 240V plug on input cable

Portable model, non-permanent installation 

MODEL

MODEL

30

31

Summary of Contents for EVC30T

















Reviews: