Technical Support Line +44 (0)23 9269 6638 (Option 3) POE-ULTRAPOD™ PAK200903_02B Nov 2017 © 2017 Elmdene International Ltd
LED Indication
Green LED
Red LED
PoE Present LED
Fault LED (ON when output fuse fails)
Mechanical
POE-ULTRAPOD-MOD™
POE-ULTRAPOD-B™
Dimensions
134L x 84W x 35D
355L x 382W x 85D
Battery Capacity
N/A
12V 17Ah
Weight
180g
2.5Kg
Enclosure Material
N/A
1.2mm steel white powder coated
Environmental
Temperature
-10 to +40°C (operating) 75% RH non-condensing
POE IN
PoE 802.3bt (60W) from PoE++ source
(PoE and PoE+ can be used, see output Specification above)
DATA
Data Connection to IP device
OP +/-
Load Output: 13.8V dc (+/- 5%) @ 3A max (PoE++ input)
BATT +/-
12V Battery Connection – observe polarity
POE
Relay Output for PoE power failure. Open on loss of PoE
GEN
Relay Output for output fuse failed or/and low battery level (less than 10.7V)
when PoE is off. Open in Fault condition
This unit must be fed from a compliant PoE power source (PoE 802.3bt for 3A power output)
Unboxed Module:
Mounting
1)
Mount securely utilising the DIN rail mount or the provided mounting lugs
Boxed Module:
Mounting
1)
Mount securely utilising the enclosure mounting points in the correct orientation, allowing
100mm clearance around the enclosure
2)
Route cables via knockouts and/or rear cable enclosure entry holes
Fig. 1 Mounting of Ultrapod
C
ONNECTIONS
I
NSTALLATION
I
NSTRUCTIONS
100mm
100mm
