REV A IN 7849211-30
Page
1
of
4
Wiring Assembly Instructions
7849211-30 Contact, ITA, Coax, RG180A/B (95 Ohm), RG179 (75 Ohm)
.
Fig. A.
(Contact Sub-Assembly)
Contact Sub-Assembly Piece Parts.
Contact Crimp Information Table
Wire
Type
Wire
Awg.
Strip Length In Inches Crimp Tool
Hex Die Set/
Positioner
Indicator Selector
No.
Heat-shrink
Length X Dia.
RG180
RG179
24
A) 1/4” B) 3/8”
C) 5/8”
*452200
**452300
*452205
** 452301
Blue
N/A
1
N/A
N/A
N/A
NOTES: *For Center Pin Crimping (Step 7). **For Shield Crimping (Step 11).
NOTE 1:
Refer to
IPC/WHMA-A-620A
standard (Ch. 11.1.2) for cable lengths, measurements and tolerance.
NOTE 2:
Overall length of cable should be less 3/8” to compensate for the contact attachment.
STEP 1)
From the "Contact Crimp Information" Table, use the crimp tool and hex die set listed.
Fig. B. (Crimp Tool 452200) Detail A. (Crimp Tool and Positioner)
Test Requirements
Test Type
Voltage (Hi-pot Only)
Pull Test
Depth Gauge
Marker Settings
Hi-pot
500V DC
5lbs
N/A
N/A
