18
PROBLEMS AND SOLUTIONS
The machine indicates on both the displays any malfunction with the following
messages:
ERROR CODE
MEANING
SENSOR ERROR
Error sensor assembly:
•
Clean the drag unit.
•
Verify that the connection wire runs from the
motherboard CN1 connector.
If the error persists, call Electrocoin Aftersales
PRINTER ERROR
Printer error:
•
Verify that there is paper into the printer
•
Verify that the block paper lever is in print-
position (Fig.6)
•
Verify the connection from motherboard (CN5)
and printer
•
Verify the power wire of the printer (CN10)
If the error persists, call Electrocoin Aftersales
Figure 7
