19
CARD ERROR
Error card reader:
•
Verify there is nothing inside the reader
•
Verify the connection with the motherboard
(CN5)
•
Verify the connection to power supply of the
card reader (CN9)
•
Verify that the reader installed coincides with
those programmed (see CARD READER TYPE
pag.10)
If the error persists, call Electrocoin Aftersales
PC ERROR
Error connection to PC:
Verify that the PC is ON and that the WinMt program is
working.
Verify the connection between the machine and PC
If the problem persists, it’s possible to ensure that the
Ticket Eater continues to work without PC, setting to
“OFF” the parameter of connection to PC, as explained
in the section: PC CONNECTION (Pag.8)
BARCODE ERROR
Some tickets have been inserted with a not-recognized
barcode. Tear any tickets present in entry, turn OFF
and ON the machine.
FULL SACK
Empty the sack and release the discharge path of
tickets from the cutter. If the errore persists, verify
the sensor place on the path.
WIDTH ERROR
Error in the measure of width ticket: have been
inserted a ticket too close (attempt of fraud).
The counting automatically restarts after few seconds.
