Elma Laser 3
29
v.170801
01-08-2017 15:53:41
4. Measuring
Press
button to turn on the instrument, the laser is active.
Set the reference if needed, see Chap.
3.3-3.6
, and the measuring function see chap. 5.
Aim at the target and follow the instruction on the display.
Press
button to make a measurement.
4.1 Single Distance Measurement
Press
button, see the distance immediately on the
summary line 4
.
Continue measuring, keep press the
button and see the last four values on the display.
The latest results will always be shown at
summary line 4
Note!
The latest 99 measurement is automatic stored in the memory.
Example of several measurements one after another.
Press the
button to delete the last measurement shown on the display.
In the above example in step 6, pressing the
button will remove the value in
summary line 4
and replace it with the measurement just before. See step 7.
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Press
Turn on
1 meas.
2 meas.
3 meas.
4 meas.
5 meas.
Delete the
last result
Intermediate line 1
6.000 m
4.000 m
Intermediate line 2
+
6.000 m
4.000 m
3.500 m
4.000 m
Intermediate line 3
6.000 m
4.000 m
3.500 m
2.000 m
3.500 m
Summary line 4
- - -
m
6.000 m
4.000 m
3.500 m
2.000 m
3.000 m
2.000 m
4.2 Max / Min continuous measurement
The continuous measurement function (tracking) is used for transferring measurements, e.g.,
from construction plans. In continuous measurement mode, the measuring tool can be moved
to the target, the measured values are updated approx. every 0.5 seconds in the
summary
line 4
. The corresponding minimum and maximum values are displayed dynamically in
intermediate line 1
(max.) and
intermediate line 2 (min.)
. As an example, the user can
move from a wall to the required distance, while the actual distance, can be read continuously.
The function is terminated automatically after continuous 500 times measurement.
Start the continuous measurement, hold the
button until:
Max.
(
intermediate line 1
) and
Min.
(
intermediate line 2
) can be seen on the display.
Stop the continuous measurement by pressing the
button.
Max
. and
min.
values is shown on the display.
Note!
Continuous measurement is not stored in the memory.
Figure
G
