Elma Laser 3
27
v.170801
01-08-2017 15:53:41
Figure D
3. Initial Operation and Settings
3.1 Switching On and Off
Switches on the instrument and laser
.
Note!
Laser shuts automatic off after 30 seconds.
Press this button longer to switch off the instrument.
NB!
The instrument switches off automatically after three minutes of inactivity.
3.2 CLEAR button
The last action is cancelled or the data display is cleared, 0.0x on the
summary line
4
.
If in the mode of History storage, press Storage
and Clear button
simultaneously will clear all storage data in the memory.
3.3 Reference Level Setting
The reference level can be adjusted in four different ways.
Use the reference
button to step though the different references.
Bottom
Corner
Top
Tripod
*Deafult 0-reference
**
End piece
Reference
Top
Reference
Tripod
0 cm
- 2 cm
+ 11,5 cm
+ 0,7 cm
* Default reference is at the
bottom
of the instrument, See
Figure A
and
Figure D.
NB!
After a re-startup the reference returns automatically to the default setting (
Bottom
)
To change the reference, press the
button on or more times:
** End piece
(Unfolded)
Top
(front
Elma Laser 3
)
*Bottom
Default reference
A special beep sounds whenever the reference setting is changed. (Sound could be off)
3.4 Using the Tripod reference
Switch the reference on the tripod on, hold down the reference button.
2 sec.
