Elma Laser 3
32
v.170801
01-08-2017 15:53:41
5.7 Storage
Elma laser 3
automatically saves the previous 99 records (measurements or calculated
measurements). In other words, a record is saved every time there is a complete
measurement (when a result is seen in the
summary line 4
).
Recall saved measurements
Press
button to enter memory mode.
Use
,
or
buttons to navigate though these records.
You can delete all records, by pressing
and
button simultaneously.
Note!
Continuous measurements are not saved.
5.8 Timer
Instead of using
MEAS
. Use
Time
to delay the measurement up to 60 seconds.
Pres
button
and delay the measurement. Standard is
5 sec
.
Use
or
buttons to change the time delay.
Remaining seconds until measurement (e.g. 59, 58, 57...) are displayed in a countdown,
laser will flash followed by a acoustic beep (If sound is turned on)
The last 2 seconds the laser symbol will flash and the beep is faster. After the last beep,
the measurement is taken and the value is displayed.
5.9 Bluetooth
Elma Laser 3
includes a Bluetooth 4.0 module. Bluetooth is always active when the
instrument is turned on. You can connect
Elma Laser 3
with your smartphone by using the
Elma Link APP
this is available for free in Apples App Store and Google play.
Measurements from
Elma Laser 3
are automatically transferred to the smartphone that has
installed and started
Elma Link APP
. Start the
Elma Link APP
, and use this to take a photo
and insert your measurements from
Elma Laser 3
for documentation and further processing.
5.10 Measurement with angle sensor
The built-in angle sensor measures angles between ± 90
0
.
Press this button to activate the sensor.
See the angle value displayed in
intermediate line 1
.
Press
to measure the distance (
L
) and the angle.
The angle are displayed in
intermediate line 1
A
are calculated from
θ
and
L,
see
intermediate line 2
B
are calculated from
θ
and
L,
see
intermediate line 3
Distance (
L
), see
summary line 4
*Note!
This measurement corresponds to that described in section
5.4
. but this is more simple
because you do not have to make the horizontal (perpendicular) measurement.
Pressing the
button repeatedly gives you the opportunity to do the same measurements as
described in section
5.5
and
5.6
here, you do not do the horizontal (perpendicular) measurement.
Follow the instructions on the display with the flashing line when this function is used as it may be
different from those described in section
5.5
and
5.6
.,
Figur K
