25
Move laser to desired center of shape.
Press to cut the shape. At the end
of the cut, the laser will return to the
center point of the shape.
ADVANCED
The Laser will turn on next to the Blade
Holder in the Machine.
Select the desired shape, as well as its
size and options.
Press . Press to highlight and
to select, or press to select
Center Point.
1
2
SPEED: 4
PRESSURE: 2
12"x12"
Cardstock L
Shadow
Pieces
Embellishment
H: 5.00"
W: 5.38"
QTY: 1
Starter and Rockin’
Jani
e
All
SPEED: 4
PRESSURE: 2
12"x12"
Cardstock L
Shadow
Pieces
Embellishment
H: 5.00"
W: 5.38"
QTY: 1
Starter and Rockin’
Jani
e
All
Add to Favs
Blade Holder
Center Point
Double Cut
Laser Cut Preview
Pen Holder
Print 2 Cut
Rotate
Setup
Space
P
R
Setup
Space
P
R
5
SPEED: 4
PRESSURE: 2
12"x12"
Cardstock L
Center Point
Shadow
Pieces
H: 2.00"
W: 1.64"
QTY: 1
Starter and Rockin’
Jani
e
All
3
SPEED: 4
PRESSURE: 2
12"x12"
Cardstock L
Center Point
Shadow
Pieces
Embellishment
H: 5.00"
W: 5.38"
QTY: 1
Starter and Rockin’
Jani
e
All
”Center Point” will appear on the
screen.
Blade Holder
Laser Point
This function makes it easy to center a shape inside (or around) another shape or within a particular area of a shape. Have
fun with this function and discover its countless options!
To cut another shape, select the shape
and press . The shape will use the
same center point as the previous shape
unless you move the laser.
6
Setup
Space
P
R
4
Only one shape can be
added to the Queue at
a time while using
Center Point.
Use Laser Cut Preview
(see pg. 26) to ensure
your cut will fit in the
area desired.
Center Point is active
until turned off in Pop-Up
Menu by selecting Center
Point again.
Center Point
Select this function when using thick materials or intricate designs that may not be completely cut through.
Cut the shape as normal, then move the cut shape with the Blade Positioner Control just enough to check the cut. If the cut
is not completely through the material, select Double Cut from the Pop-Up Menu to cut exactly over the previous cut. This
option may be used as many times as necessary to completely cut through the material.
CENTER POINT
Do not
remove Cutting Mat from Machine before using Double Cut.
DOUBLE CUT
Setup
Space
P
R
Setup
Space
P
R
Setup
Space
P
R
