Back of
Handheld Remote Control
Back of machine
2
3
1
Printed on a ring around the Blade Holder top are Blade Depth Settings. Ranging from 1 to
6, these numbers can be selected individually by turning the wheel to the number relative
to the material you are using.
As a general rule, thinner materials such as paper and vinyl require a lower number
Blade Depth Setting, while thicker materials such as light chipboard and heavy cardstock
require a higher number Blade Depth Setting. For optimal results, try a test cut and make
necessary adjustments to the Blade Depth Setting before performing the final cut.
Depth Selection
Arrow
1.
Plug Power Cord into Universal Power Supply.
2.
Plug Universal Power Supply into back of eclips Machine.
3.
Plug USB cable into back of eclips Machine.
4.
Plug flat end of the USB cable into Handheld Remote Control.
4
CONNECTING
set up
DO NOT adjust blade depth while Machine is operating.
NOTICE
SET UP
sETTING yOur blaDE DEpTh
lower number = Thinner material.
higher number = Thicker material.
