27
ADVANCED
This function must be used with the eclips Print2Cut Creative Software (sold separately) on your home computer and
printed with your home printer.
Use Blade Positioner Control to move
the laser to the lower left registration
mark on the material and press .
Press to cut the shape.
Press . Press to highlight and
to select, or press twice
to select Print2Cut. The laser will turn
on next to the Blade Holder in the
Machine.
Place printed paper on Cutting Mat
with registration marks on left side of
shape. Load Mat into Machine.
Select same shape on eclips Machine. To
cut around the printed shape and leave
the interior intact, choose Solid, Shadow
or Outline.
1
2
SPEED: 4
PRESSURE: 2
12"x12"
Cardstock L
Solid
Shadow
H: 7.25"
W: 9.51"
QTY: 1
Starter and Rockin’
Jani
e
Setup
Space
P
R
5
3
SPEED: 4
PRESSURE: 2
12"x12"
Cardstock L
Solid
Shadow
H: 7.25"
W: 9.51"
QTY: 1
Starter and Rockin’
Jani
e
Add to Favs
Blade Holder
Center Point
Double Cut
Laser Cut Preview
Pen Holder
Print 2 Cut
Rotate
Use Blade Positioner Control to move
the laser to the top left registration mark
on the material and press .
4
Setup
Space
P
R
Setup
Space
P
R
Setup
Space
P
R
Setup
Space
P
R
Setup
Space
P
R
Setup
Space
P
R
Print2Cut and Center Point function cannot be used simultaneously.
Print2Cut is active until turned off in Pop-Up Menu by selecting Print2Cut again.
PRINT2CUT
If more than one shape is printed on material, select shape and options and press Cut.
Follow steps 4 & 5.
