99062 Series
7
Setup
Connect to Torque Controller
To get full use of the auto-reverse and torque shut-off features, this motor must be used with the Elliott
Model ELC110220 Electronic Torque Controller. Connect the 7-pin connector on the motor cord to
the 7-pin socket on the torque controller. The controller will automatically detect whether the motor
is 110V or 220V and whether the motor is auto-reversing or manual reversing. (Note: The operating
voltage must correspond with the voltage indicated on the motor’s name plate. 99062-110 motors
designed for 110V can be used with 120V as well. 99062-220 motors designed for 220V can be used
with 240V as well.
When operating the motor in conjunction with Elliott’s ELC110220 Torque Controller the following
maximum settings must be followed:
Electric motors are designed to operate within
a specific amperage range. Operating above the
maximum specified amperage rating will result in
damage to the motor.
Recommended Electrical Settings
Model
Single Phase
Voltage
Maximum
Amperage
Maximum
ELC110220 Setting
99062-110-7P
110
4.3
215
99062-220-7P
220
2.2
110
