99062 Series
11
Brush Replacement
When To Replace The Carbon Brushes:
When the brush lengths are .25” (6.35mm) or less, brushes need to be replaced. Brushes are field-
serviceable components and should be replaced by a maintenance technician.
1. Disconnect motor from any power source.
2. Remove (7) side screws (Item 9) from the housing set (Item 8).
3. Slide out brush holder (Item 17) & carbon brush (Item 19) from the housing set (Item 16).
4. To remove the carbon brush from the brush holder, press the copper tab thru the window in the
brush holder & pull the carbon brush free of the brush holder.
5. Insert the new carbon brush into the brush holder until the tabs click into place.
6. Slide the brush holder & carbon brush into slot in the housing set.
7. Repeat steps 2 thru 5 for replacing the carbon brush on the other side of the armature (Item 12).
8. Replace the housing set & the (7) side screws.
