MP200 Installation Manual
3
1.0 General Characteristics
• The MP200 is a multifunction, multi-user system that can be remote controlled and is based on a family of
expandable control units on a serial Bus line, with a shared range of devices for managing the system
(concentrators, keypads, key readers, etc.). The MP200 was designed for installation with one of the most
innovative microprocessor technologies and is a flexible system created to satisfy the requirements of an
increasingly demanding market. The software was designed to be "open" to any innovation and as a consequence
may be integrated simply and quickly with future functions.
1.1 SYSTEM FEATURES
User-friendly
• The guided menu on the keypad display is user friendly for system programming and management. High visibil-
ity script display for the individual areas (e.g. IR STOREROOM), the various codes and/or keys (e.g. ROSSI
MARIO) and the various sectors (e.g. OFFICE AREA) means that the end user can identify quickly and un-
equivocally the alarm triggered or the operation to carry out.
Multifunction
• The areas and outputs may be programmed individually to take into account a series of alarms or conditions
such as burglary, 24hr burglary, tampering, armed robbery, fire, technological alarm, technological control, tele-
help, system status, breakdown and many other functions.
Multi-user
• Possibility of acting simultaneously from more than one key reader and/or keypad.
Subsystem management (separate systems) from a single central unit, each of which must be split into one or
more sectors.
Clock-calendar and Time programmer
• The MP200 system fits a clock-calendar for chronological event classification and for time programmer control.
The latter offers ample management flexibility thanks to different daily and weekly timetables that are fully
programmable. It may be associated not only to the activation and deactivation of the burglar alarm, but also to
other functions such as technical control (heating, lighting, etc.).
Remote Management
• The various systems installed can be programmed and controlled thanks to telephone line modem transmission
using a Personal Computer and Telemanagement Fast-Link software. All programming data can be uploaded and
downloaded, zones can be excluded and included, system status and memory events situations can be requested,
as well as testing of batteries and yet other functions. Remember that the same operations may be undertaken
locally by connecting the personal computer to the control unit using the special cable and RS232 connector
found on the motherboard. The end user may also achieve remote interaction with the system using a telephone
line.
Alarm Transmission
• The MP200 system may transmit alarm conditions via a telephone line and this may be programmed in three
different ways: using a modem connecting a control unit installed with a Personal Computer and Fast-Link
software; using numerical protocol (selected from the choices available on the board) to a remote-surveillance
centre; by sending messages previously recorded in voice mode (if the SV108 voice synthesis board is in-
stalled). When transmitting via modem and when using the numerical protocol (for those protocols that allow it)
data transfer to the reception centre envisages “point-to-point” information, that is to say for each zone involved
in the alarm.
Modem - Communicator STM200
• A telephone alarm transmission board for remote management and remote programming of the system.
Summary of Contents for MP 200
Page 19: ......
