MP200 Installation Manual
24
• If the mains power supply failure continues:
- after one hour with no power:
Switching of Breakdown programmed outputs.
A spontaneous message appears on the keypad display:
“Message” + details.
The red LED flashes rapidly on any key configured readers.
“Mains Not OK” + details is recorded in Historic Events.
Communication of the power failure event to programmed telephone
numbers (if the STM200 Modem Communicator board is present).
- when power is restored:
an immediate return of power is handled as described on the previous
page
after 15 minutes of mains OK:
Breakdown programmed outputs are restored.
- when power is restored:
an immediate return of power is handled as described on page 21.
after 15 minutes of mains OK:
Breakdown programmed outputs are restored.
The spontaneous message on the keypad display is erased.
The red LED on any configured key readers will switch off (any alarm
memory remains active).
“Mains signal OK”is recorded in Historic Events.
Communication of the power failure event to programmed telephone
numbers (if the STM200 Modem Communicator board is present).
Summary of Contents for MP 200
Page 19: ......
