19
ELR600RT/10-15-20
4. PREPARING THE DEVICES
Unscrew the fixing screws on the standard cap covers and the transmitter holders on the RX and TX barriers
and remove the covers.
Remove the standard cap from both the TX and RX barriers.
To access the inside of the barriers, remove the plastic profile, being careful to hold the barrier as shown in figure
1 when sliding the profile out.
CAUTION!
There is a wire cable between the transmitter holder and the barrier that connects the two parts. Before
sliding the upper plastic profile, it is advisable to hold the barrier at the point shown in figure 1:
YES
NO
Transmitter holder
Standard cap
Plastic profile
1
2
Standard cap cover
