20
ELR600RT/10-15-20
POWER SUPPLY AND LEARNING
Remove the battery insulators from inside the RX barrier and check that the red DL1 LED is flashing on
the motherboard.
Enable the learning feature in the anti-intrusion system control unit (for more details, see the dedicated
instruction manual).
Press the Learn/Test button on the radio transmitter to send a signal to the control unit.
Check that the learning signal has been received on the control unit. To complete the learning process, see
the control unit manual.
Remove the battery insulators from inside the TX barrier and check that the red DL1 LED is flashing on the
motherboard.
CONFIGURATION STEPS FOR AN INITIAL ALIGNMENT AND OPERATION TEST
Switch on TEST DIP1 on the TX motherboard.
Switch on TEST DIP1 on the RX motherboard.
Learning and
Test button
