background image

29

28

W W W. I N E L S . C O M / K I T S

U S E R ´S   M A N U A L   2 . 0

OTHER 

RF UNITS

OTHER 

RF UNITS

TEMPERATURE CONTROL

SYSTEM UNITS

4510

PICTURE

DEVICE DESCRIPTION

TYPE/CODE

Used to control up to 40 wireless units. Besides switching, cont-
rolling and dimming, it includes thermostats with weekly progra-
mming and it also enables to connect detectors. In the size of the 
switch, with frames in the LOGUS

90

 design intended for surface-

-mounted installation. Power supply 230V. White color.

WIRELESS TOUCH UNIT - SURFACE MOUNT

RFTW-AWH-

-BWH-CWH

The mediator between your controller and wireless units controlling 
lights, heating, shutters, sockets and other appliances. eLAN-RF-003:  
It is connected to LAN network of your router and it is placed to ensure 
the visibility to other controlled units. eLAN-WI-003: App for contro-
lling is free to download from GooglePlay or iTunes Store.

SMART RF BOX,

5173

(487 2)

SMART WI BOX

IP CAMERA FOR OUTDOOR USE

6703

MULTIFUNCTIONAL GSM COMMUNICATOR

GSM gate intended to be mounted in a switchboard enables a re-
mote control of wireless units via SMS text message. It can also 
send SMS text message containing information about the status 
of wireless units. It contains 4 binary inputs for signals and 2 relay 
outputs 8A/2x2000W to switch directly the unit.

4604

Indoor color camera D-Link DCS-933L/E can be easily conne-
cted to LAN through cable or to wireless WiFi network. It is 
possible to monitor up to 10 cameras in the App. Resolution 
640x480, dimension: 80x115x80mm, power supply: inclu-
ded in the package 5V/1A.

RF TOUCH - W

eLAN-RF-003

(Wi-003)

iNELS CAM

RFGSM-220M

Repeater in the socket design, that is used to increase the 
range of signal or in case of low signal between controller 
and unit. It is possible to repeat the signal of up to 20 units.

REPEATER TO EXTEND THE RANGE

RFRP-20

LIGHTING

PICTURE

DEVICE DESCRIPTION

TYPE/CODE

6630

Coloured RGB strip, 7.2W/m (30 LED chips / m), length 5 m, width 
11mm, outdoor-proof design, also designed for installation on alu-
minium rails, adhesive tape, it can be shortened by 10 cm, luminous 
fl ux of 660 lm/m, control by RFDA-73M dimmer, power supply 12V.

COLOURED RGB LED STRIP, 5 METERS

6589

Power supply 230V/12V/60W to power 5m of RGB strip. 
Intended for outdoor use (IP67), dimension 162,5 x 42,5 
x 32 mm.

POWER SUPPLY FOR 5 M RGB STRIP

7,2W, RGB, 

30LED/M

DC 12V/5A 

60W

 

This RGB LED bulb consists of 3 color chips which can mix up 
any color at diff erent temperatures. Bulb has a built-in rece-
iver and dimmer, so it can be easily replaced for the original 
bulb. Other functions: colorful scenes, brightness setting etc.

WIRELESS RGB BULB

4931

RF-RGB-

LED-550 

This bulb comes in both warm and cool white, it has built-
-In wireless receiver and dimmer, it can easily be placed 
in any existing base and control by any controller. 

WIRELESS WHITE BULB

4936

RF-WHITE-

LED-675 

PICTURE

DEVICE DESCRIPTION

TYPE/CODE

Digital thermostat in the design of the LOGUS

90

 switch (plas-

tic, glass, metal, wood). It measures the room temperature and 
according to the set heating program (weekly mode) it sends 
commands to the switching unit (heating device). Battery-po-
wered (2xAA). It is possible to control up to 4 heating circuits. 

WIRELESS TEMPERATURE CONTROLLER

RF TC50/G/

BR/BR

Temperature unit in the design of LOGUS

90

 switch. It measures the 

temperature and switch a heating circuit at the same time. Relay 
contact 8A/2000W, power supply 230V, the possibility to connect 
an exter. temperature sensor. It is possible to connect up to 30 units.

SWITCH UNIT WITH A TEMPERATURE SENSOR

RFSTI-11/G/

BR/BR

RFATV-1

6307

Wireless thermovalve measures the room temperature and 
sends it to the Smart RF box, that compares the temperature 
records with the set temperature and according to set pro-
gram it sends a command to open or close the radiator valve.

RFTC-50/G

WIRELESS THERMOVALVE

RFSTI-11/G

PICTURE

DEVICE DESCRIPTION

TYPE/CODE

Internal or external sensor measures the temperature starting 
from -20 up to 50°C. Intended to be mounted into an installati-
on box, but it can be also placed anywhere. Recommended ex-
ternal sensor - TC/TZ 3-6-12 m. Battery-powered 3V/CR2477.

WIRELESS TEMPERATURE SENSOR

3175

THERMODRIVER

6602

Electric thermodrive to be mounted on the radiator valve 
(including adapter VA80 for valves Heimeier, Oventrop, 
Schlösser, Herb or Onda. (M30 x 1,5)). Power supply: 230 V 
(closed without power).

RFTI-10B

TELVA/230V

TEMPERATURE CONTROL

Summary of Contents for iNELS 5174




















Reviews: