19
18
W W W. I N E L S . C O M / K I T S
U S E R ´S M A N U A L 2 . 0
ADDITIONAL SETTINGS
Pairing / removing Wireless thermovalves
5.
Used to pair wireless thermovalves with switching unit, that controls the heating source (mainly boiler).
It avoids a situation when your boiler is working but all the radiators are closed.
Click on the Settings / Programming / Temperature regulation and select the Assigned receivers (Fig. 2).
The list of all assigned Heating circuits will be displayed.
By tapping on the name, the following options will be displayed: Removing / Pairing / Paired with... /
Address change (Fig. 6). Using the arrow keys you can double-check the name and address of the
assigned Wireless thermovalve (Fig. 4,5).
Fig.
4
Fig.
4
RFATV-1
Fig.
1
Fig.
1
Fig.
2
Fig.
2
Fig.
5
Fig.
5
ADDITIONAL SETTINGS
Others
4.
Click on the Setting / Others and other settings of
Wireless touch unit will displayed.
Lock the keyboard:
it helps to prevent accidental
or unwanted control Wireless touch unit (Fig. 3).
Double tap on the lock icon to unlock default screen
(Fig. 4).
Display menu:
you can specify which items will
be shown in the main menu (e.g. just Dimming,
Switching and Detectors - Fig. 5-6). The icon
means that these items will not
be shown in the Main menu.
Temperature regulation
(Fig. 8): Celsius and Fahrenheit degrees (°C to
°F), heating hysteresis setting: the lower and upper limits of the range 0.5. -
5°C (Fig. 9); the off set setting (to compensate inaccuracies in the temperature
measurement) in the range from -5 to +5°C; thermostat: Heating/Cooling.
Home screen
: set Favorites panel to your home screen (Fig. 10, 11).
Left = 1. option, middle = 2. option, right = 3. option.
pic.
11
pic.
11
pic.
8
pic.
8
pic.
9
pic.
9
Fig.
7
Fig.
7
pic.
10
pic.
10
Fig.
6
Fig.
6
Fig.
5
Fig.
5
Fig.
4
Fig.
4
Fig.
3
Fig.
3
Fig. 1
Fig. 1
Fig.
3
Fig.
3
Heating 1
Heating 2
Heating 3
i
ng 2
g 2
i
n
ng
g
g
g
g
3
3
3
3
3
3
TO REMOVE
Used to remove Wireless thermovalve (it will not be assigned using short
name - Heating 1, Heating 2, Heating 3)
Thanks to this option you can combine Wireless thermovalves with switching
actuator RFSA-61M, RFSA-61B or RFDAC-71B. The wireless thermovalve mea-
sures the current temperature and switching actuator, based on the measured
temperature, will switch ON/OFF the heating source. In case that switching
actuator is paired with more Wireless thermovalves, so then the boiler will be
turned off /on after the desired temperature is recorded by all thermovalves.
The switching unit paired with Wireless thermovalve will be shown. You
can remove the paired unit by clicking on the unit name.
PAIR WITH ...
PAIRED WITH ...
Used to change the address of Wireless thermovalve.
ADRESS CHANGE
Fig.
6
Fig.
6
RFATV-1
Fig.
2
Fig.
2