background image

27

26

W W W. I N E L S . C O M / K I T S

U S E R ´S   M A N U A L   2 . 0

OTHER 

RF UNITS

OTHER 

RF UNITS

SWITCHES

CONTROLLER

PICTURE

DEVICE DESCRIPTION

TYPE/CODE

1-channel switching unit in the box that provides higher protec-
tion level. Intended for outdoor installation suited for wet, humid 
and dusty areas. Output switching contact 12A/3000W, power 
supply AC 230V, 6 functions. It it possible to control up to 32 con-
trollers. Enclosure IP65, dimension 136x62x34 mm, color: grey.

SWITCH UNIT FOR OUTDOOR USE 

4526

Used to control shutters, blinds, awnings, garage doors, gates, 
skylights - all devices that can be controlled in two directions. It 
can be controlled by up to 32 push-buttons of any controller. In-
tended to be mounted into an install. box or to the motor housing. 
Power supply AC 230V, switching capacity for the contact is 8A.

SWITCH UNIT FOR SHUTTERS (CONTACTLESS)

4682

PICTURE

DEVICE DESCRIPTION

TYPE/CODE

Quick solution for wireless control of plug-in appliances, when 
the switching socket is installed between the existing socket and 
a plug-in appliance. Output contact 16A/4000W, 6 functions, it is 
possible to control up to 32 controllers. Dimen.: 60x120x84 mm.

SWITCHING SOCKET

4560

1-channel and 2-channel switching actuator intended to be mounted 
into an installation box, that can switch any device. It can control up 
to 32 controllers. Power supply 230V. RFSA-61B: Switching contact 
16A/4000W. RFSA-62B: 2 independent 8A/2x2000W contact.

WIRELESS SWITCH UNIT - 6

4499

(4770)

PICTURE

DEVICE DESCRIPTION

TYPE/CODE

DIMMERS

For dimming of lamps and lighting construction, when the swit-
ching socket is installed between the existing socket and the lamp. 
It allows you to dim incandescent bulbs, halogen lamps, dimmable 
energy saving bulbs and modern LED lighting sources up to 300 W.

DIMMING SOCKET (MULTI-FUNCTION)

4594

Wireless multifunction (7 functions) dimmer used to dim 
incandescent bulbs, halogen lamps, ... The type of lighting 
source is selected using the rotary switch. Intended to be 
mounted into an installation box. Power supply AC 230V.

UNIVERSAL DIMMER (INBUILT)

4512

Dimmer intended to be mouned in a switchboard to control colou-
red RGB. Strips with max. power 70 W / channel that corresponds to 
approximately 10 m of RGB strip. Power supply DC 12-24-V, option 
of color blending mode, control through keychain, RF Pilot or App.

DIMMER FOR COLOURED (RGB) LED STRIPS

4681

6-channel switching actuator intended to be installed in the swit-
chboard contains 6 independent 8A contacts, that can switch any 
device connected in switchboard. Power supply 230V.  The antenna 
AN-I included in the package can be replaced by external type AN-E 
what eliminates the infl uence of  metal door of switchoboard.

WIRELESS SWITCH UNIT - 6 OUTPUTS

4282

4897

Wireless multifunction (7 functions) dimmer used to dim 
incandescent bulbs, halogen lamps, dimmable energy saving 
bulbs and modern LED lighting sources up to 600W of power. 
Power supply AC 230V.

UNIVERSAL DIMMER

RFSC-61

RFSA-61B 

(RFSA-62B)

RFSA-66M

RFUS-61

RFJA-12B

RFDSC-71

RFDEL-71B

RFDA-73M/

RGB

RFDEL-71M

PICTURE

DEVICE DESCRIPTION

TYPE/CODE

Each of the 2 independent push-buttons can control any 
number of wireless units (switches, dimmers, shutters). In 
the design of LOGUS

90

 switch (plastic, glass, metal, wood, 

stone). Battery-powered 3V/CR2032. Color: white.

RFWB-20/G 

4037

4 BUTTON CONTROLLER - KEYCHAIN

4375

Wireless controller sends a command to switch ON/OF or dim 
any wireless device after pushing the button. You can control 
independently up to 4 devices. By one touch, you can switch 
ON any number of units at once. Battery-powered 3V/CR2032.

Universal controller with display enables you to comfortably 
control wireless units, using all their functions. It enables 
to create rooms, scenes and favorites sections/folders. It is 
possible to preset up to 40 units. Battery-powered 2xAAA. 

WIRELESS REMOTE CONTROLLER WITH DISPLAY

4376

Transmitter serves as the contact converter of external device 
to the commands for wireless units. It contains 2 inputs, that 
can be switched ON permanently (by push-button or switch). 
Battery-powered 3V/CR2477, into an installation box. 

WIRELESS CONTACT CONVERTER

4175

RF KEY

RF PILOT

RFIM-20B

WIRELESS WALL CONTROLLER

Each of the 4 independent push-buttons can control any 
number of wireless units (switches, dimmers, shutters). In 
the design of  LOGUS

90

  switch (plastic, glass, metal, wood, 

stone). Battery-powered 3V/CR2032. Color: white.

RFWB-40/G

4060

WIRELESS WALL CONTROLLER

SWITCHES

Summary of Contents for iNELS 5174




















Reviews: