background image

Televis

Go

Page 66/68

13.    WARNINGS

13.1   RESPONSIBILITY AND RESIDUAL RISKS

Eliwell Controls srl

 declines any liability for damage due to:

•  Unspecified installation/use and, in particular, in contravention of the safety requirements of established legislation or specified 

in this document.

•  Use on equipment which does not provide adequate protection against electrocution, water and dust in the actual installation 

conditions;

•  Use on equipment in which dangerous components can be accessed without the use of specific tools;
•  tampering with and/or modification of the product;
•  Installation/use on equipment which does not comply with established legislation and standards.

13.2 DISCLAIMER 

This document is the exclusive property of 

Eliwell Controls srl

 and may not be reproduced or circulated unless expressly autho-

rized by 

Eliwell Controls srl

 itself.

Every care has been taken in preparing this document; however, 

Eliwell Controls srl 

cannot accept liability for any damage 

resulting from its use.
The same applies to any person or company involved in preparing and editing this document. 

Eliwell Controls srl 

reserves the 

right to make changes or improvements at any time without notice.

Summary of Contents for TelevisGo





































































Reviews: