Eliwell TelevisGo, User Manual

Page: 26 / 68

Televis
Go Page 26/68
5.4 SCHEDULED ACTIVITIES
Televis
Go
can run actions automatically that have been scheduled by users.
There are two types of scheduled activities (or actions):
• Send command to one or more devices.
• Write parameters to one or more devices.
Scheduled activities can have one of three types of frequency:
• Periodical: the action is carried out periodically, with the frequency defined by the user.
• Daily: the action is carried out every n days at one or more times during the day.
• Weekly: the action is carried out every n weeks, on specific days and at one or more times during the day.
Each scheduled event begins at a time set by the user and continues indefinitely with the defined frequency.
The action is therefore performed in accordance with the set schedule. If the action fails, Televis Go continues to attempt to execute
it at user-defined intervals up to a maximum time, again set by the user. If the maximum duration is set to 0 or if it is less than the re-
attempt interval, no further attempts will be made.
Scheduled activities can be applied to a selection of devices in the current configuration. The selection is done by applying a user-
defined filter to the current network configuration. The result of this filter is the list of devices that the action is to be applied to.
5.4.1 VIEWING SCHEDULED ACTIVITIES
To view the current list of scheduled activities, go to:
Settings Scheduled activities Summary
A window similar to this one will open:
Scheduled actions
Type Name Description Schedule
Next
execution
Defrost
Send command: Manual Defrost Every week on Sunday, Wednesday and Saturday at 09.30 31-Jul-11
09.30
7-Jan-11
00.30
5-Jan-11
05.00
and 12.30 (beginning on 31-Jul-11 22.00)
Every 3 days at 00.30 (beginning on 1-Jan-11 11.00)
Every 1 day and 6 hours (beginning on 1-jan-11 11.00)
activation (1 device)
Write parameter map: Map_1.dat
(16 devices)
Write parameters [Set=-2,
HAL=1, LAL=-5] (1 device)
Mappa
Scrittura
Set Point
View
Actions
Page last update on: 4 January 2011 - 15.59.56
In the example, Televis Go shows three scheduled actions plus a description of each. The columns in the table contain the following
information:
• Type represents the type of action; send command ( ) or write parameters ( ).
• Name is a user-defined label.
• Description describes the activity that will be performed; the number of devices it will be applied to is given in brackets.
• Scheduled
describes when/how often the activity will happen.
• Next executed on states the next day/time the activity will be performed.