Eliwell TelevisGo, User Manual

Page: 30 / 68

Televis
Go Page 30/68
5.4.2.4 Filters
The Filters section shows the structure of the current filter.
Language
Filters
English
Edit
Type=analog
Name=*2*
Address=00:0?
ID=0
Selector
Resource
Device
Interface
Example of filter
This filter selects all analogue resources with a "2" (* is a jolly
character) in their Italian name and belonging to devices with
addresses from 00:00 to 00:09 (? is a jolly character), and which
are part of the interface with ID 0.
A filter is applied hierarchically to the network configuration. The purpose of the filter is to make a single, smaller selection from a
specific configuration.
This is done by defining rules for the properties of interfaces, devices and resources. Since some of these properties refer to the
translated names of resources, the
Language
the filter must use in selecting resources must be specified.
To edit the filter, click the Modify button. A window similar to this one will open:
Filters
Selector
Device Address=”00:0?”
Resource Name=”*2*” Type=”analog”
Interface ID=”0”
Add selector Filters
Save Cancel
The filter can be modified from this window. The selection and rule hierarchy is shown on the left. The icons beside each line have
the following meanings: