16
ENGLISH
EN
• Close the lever (I), making sure it starts pres-
sing the quick release inside the predefined work
area; between 55° and 65° (Fig.17).
• If the lever (I) starts pressing the quick release
in the advanced work position (fig. 18), screw the
right bushing pin (L) (fig. 19) so that the lever
starts working inside the predefined work area
(between 55° and 65°) (Fig.17).
• If the lever (I) starts pressing the quick release
in the delayed work position (fig. 20), unscrew the
right bushing pin (fig. 21) so that the lever starts
working inside the predefined work area (between
55° and 65°) (Fig.17).
• Make sure the overtravel lever (M) is in the
“OPEN” position (Fig. 22).
• Turn the knob (N) anticlockwise (Fig. 23) until
the roller of the resistance unit (M) touches the
wheel (Fig. 24).
L
L
M
17
18
19
21
22
20
N
23
